Pressure Rating: 1.6- 4.0Mpa
Specification: Screwed:DN15-50Material: cast steel
Standard flanges: DIN, ANSI, JIS, JB79
Standard screwed: NPT
 
Working Principle.

The design makes use of the working principle of difference in density of steam and condensate. The compound lever is connected to the inverted bucket inside the valve,working on steam pressure switch.The inverted bucket is a level sensor in the steam trap with opening downward.When the device starts up ,air and low-temperature condensate enter into the tube.At this time ,the trap is completely open,allowing quick discharge of air and low-temperature condensate and temperature rising. Steam entering into the inverted bucket causes it to float.and the lever arm drives the valve corce to close. A small vent in the bucket may automatically discharge the air.Some part of the steam will be discharged from the vent ,and other part of the steam will become condensate.The inverted bucket will sink without buoyant force, and then the lever arm will help the valve core to open the valve. When the valve is open, steam will get into the bucket again,causing the valve to close again. The device will work circularly and discharge water discontinuously.

Structural Characteristic. 

Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure.It applies stainless steel internal components and heat treatable steel base . It has such features as strong structure,resistance to abrasion and corrosion, long durability, and not easy to be damaged. It is highly recommended to be used for condensate recovery sustem for its steam saving capability, High heat engine efficiency, and anti-back pressure characteristic. The trap may be assembled with check valve so as to save piping space.
 
Correct conditions for choice of configurations when placing an order: 
The user may choose the discharge capacity of trap as per max. condensate which is equal to max. steam consumption of the machine by multiplying factor (2-3 times) . Max. operating differential pressure of trap( namely, working pressure before the valve minus the back pressure behind the valve.It shall be specified if there is any back pressure.Maximum working temperature of the trap ,Drainage operating mode ,Connecting model, Valve materials.
 
Material of Main Component.

 
The table below shows the water discharge capacity of the inverted bucket type steam trap (KG/KR), When making a choice users should take 2-3 times safety factor into consideration.

Connecting Dimension (mm).
?
 880-885, side enter and side out,with filter screen, external dimension (mm):

 
881F-886F, Flange, with filter screen, external dimension (mm):

 
81-86, From below enter to upper , external dimension (mm):

Our Services
Pre-sale service:
1.We have full stock and can deliver within short time.
2.OEM and ODM order are accepted, Any kind of logo printing or design are available.
3.Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.
4.All of our products are produced by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.   
After you choose:
1. We will count cheapest shipping cost and make invoice to you at once.
2. Check quality again, then send out to you at 1-2 working day after your payment
3. Email you the tracking no., and help to chase the parcels until it arrive you. 
After-sale service:
1.We are very glad that customers give us some suggestion for price and products.
2.If you have any question,please contact us freely by E-mail or Telephone.

Attn:Ellison Yue.

Tex:86-577-57789960.

Fax:86-577-57789962.
Mobile: +86-138-6862-9071.